Aluminum Wheelchair Ramp & Its Versatility
For disabled people, getting around and climbing up stairs is very challenging. And so, there are lots of wheelchairs ramps that are accessible in several varied sizes or lengths to enable a person in wheelchair to get around quite easily. For information about wheelchair ramps, view here for more.
People in wheelchairs mostly want to be able to get around just like a normal individual, however they require the help of other people, if not other things; for instance, steps. A wheelchair ramp is necessary for them to climb up and get down easily.
The aluminum handicap ramp is an all-around system compared to all the rest of the ramp systems. The soldered aluminum construction is lighter, stronger, and will last longer than wood. Such a wheelchair ramp installation can be dismantled or set up in practically all configurations and reused anywhere. The aluminum surface practically requires no maintenance at all. Installation is immediate and can be carried out without any building permit because it may be considered an impermanent structure. An aluminum ramp is your most superior choice, plus it is maintenance along and also needs very few tools to install. A 24-inch wheelchair ramp can be set up in not more than one hour.
The installation of aluminum ramps can be fixed or temporary, and they can as well be reconfigured and transferred. Additionally, such aluminum ramp is tough against salt and snow unlike its wooden counterpart.
The various types of wheelchair ramps accessible allow persons with disabilities to easily maneuver steps and cross over any doorway heights. A wheelchair ramp also makes it easy to put in a wheelchair into a vehicle or to take it out.
The basics of wheelchair ramp installation
To comply with ADA standards, wheelchair ramps must have a ramp that measures one foot per inch of rise. There is no exception, aside from when there are restrictions in space. So, a porch featuring an entire 24-inches rise needs to have a 24-feet ramp. All ramps that measure above 30 feet needs to have a resting platform halfway. Such a platform may be straight or turned. The platform should have a length of 60 inches, at least, and of the same width as its ramp. The minimum measurement of any platform that shifts direction must 60 inches x 60 inches. All wheelchair ramps with a rise beyond 6 inches must have handrails as well as ramps which are longer that than six feet. Handrails are necessary on the two sections of ramps that feature continuous switchback rails along with dogleg platforms.
If you need help with wheelchair installation, get in touch with National Ramp.